Baofeng BF-T3 radios, the list of factory frequencies

Eight-channel Baofeng BF-T3 factory default freqs are:

Channel No.	Frequency
1	446.00625
2	446.01875
3	446.03125
4	446.04375
5	446.05625
6	446.06875
7	446.08125
8	446.09375

(it's the PMR446 with 12.5 kHz step, lower half)

If you need to quickly organize communication with them from ordinary analog radios, the easiest way is to disable the CTCSS tone squelch on the BF-T3

1. Try to find a channel with no interference without the squelch. Switch channels on the BF-T3 and turn off the squelch in each channel:
   (one press of menu, then 🔺 or 🔻 to select the channel, then menu again, then 🔻 to select the noise modulator number, set to off, then talk button to save the setting)
2. Set the frequency corresponding to the channel selected on the BF-T3 on the regular radio
3. Talk until the batteries run out

If you want to talk without interference, you can do it on a regular radio with CTCSS, then you can talk with BF-T3 on dirty frequencies too, but I'll leave it to figure out for yourself. Usually, if there is a need to talk to such a toy, it is rather something urgent and dendro-fecal at the same time, so it is unlikely that there will be time to mess with the noise modulator.